How to Use Basepaste: Step-by-Step Guide
Basepaste makes ski base repairs quick and straightforward. Follow these steps for a strong repair and safe application.
What you'll need
- Basepaste Part A and Part B, mixing cup and applicator (all in the kit)
- Protective gloves
- A plastic applicator or putty knife
- A sharp metal ski scraper
- Old clothes and something to cover your work surface
Step 1: Protect yourself and your workspace
- Wear gloves. Basepaste is extremely sticky and hard to remove once applied. We strongly recommend wearing protective gloves during application to prevent skin irritation.
- Skin contact. If Basepaste gets on your skin, wash the area thoroughly with soap and warm water right away.
- Clothing. Basepaste will permanently stain clothing, carpet and fabric. Work on a protected surface and wear old clothes.
- Eyes. If Basepaste gets in your eyes, flush them immediately with clean water for at least 15 minutes and get medical attention right away. Basepaste is a paste, like peanut butter consistency so it doesn't splash.
- Vapor. Basepaste should be used with adequate ventilation. Basepaste is a Low-VOC formula that doesn't produce harsh fumes, However it is recommended that you avoid breathing any vapors, fumes, or dust created from sanding Basepaste.
Step 2: Prepare the repair area
Clean the damaged area thoroughly to remove all dirt, old wax and loose base material. Make sure the area is completely dry before you apply Basepaste.
Step 3: Mix and apply Basepaste
Mix Part A and Part B in the included cup until the color is uniform. Apply a small amount directly into the gouge and press it in firmly with a plastic applicator or putty knife. Fill the gouge completely so the paste sits slightly above the ski base.
Step 4: Let it cure
Let Basepaste cure completely in a well-ventilated area at room temperature. Allow about 24 hours for a full strength bond.
Step 5: Scrape and finish
Once it's fully hardened, scrape the excess flush with the ski base using a sharp metal scraper. Finish by buffing or waxing as normal.
Not sure if Basepaste is the right fix for your damage? See Basepaste vs P-Tex for when to repair at home and when to take your skis to a shop.
FAQ
How long does Basepaste take to cure?
It sets quickly, but give it about 12 hours at room temperature for a full strength bond. Doing the repair in the evening and scraping it the next morning works well.
Can I speed up the cure with a heat gun or hair dryer?
Don't. Room temperature in a well-ventilated space gives the strongest bond. Too much heat can damage the ski base around the repair.
How do I get Basepaste off my skin?
Wash the area right away with soap and warm water. It's much easier to remove before it cures, which is why we recommend gloves.
Can I wax over the repair?
Yes. Once it's scraped flush, wax the ski as you normally would.