BootForge™ Standard Punch Kit
FREE SHIPPING
This kit qualifies for free shipping in the U.S. and Canada Details.
$99.00
75+ units shipped to 6 countries
04 hr
17 min
33 sec
Ships Today Standard Kits are in stock
Easy Returns
If something isn't right, reach out within 60 days and we'll make it right.
Built by Skiers
Designed and assembled in Connecticut by lifelong East Coast skiers.
The $99 BootForge™ Standard Kit: standard clamp + magnetic receiver + medium punch head. Punch pressure points at home for a dialed, pain-free fit.
- Includes the Standard Clamp, Magnetic Receiver, and Medium Punch Head (best all-around size)
- Punch + mark at home for bunions, sixth toe, and hot spots — no shop appointment needed
- Pays for itself fast vs. shop punches and repeated fit visits
Want more flexibility? The full kit adds additional heads for faster workflow and more specialized punches.
See it in Action
Watch how easy it is to punch your boots at home in just a few steps.
What's in the kit
- BootForge™ Standard Clamp
- Magnetic Receiver (swappable head system)
- Medium Punch Head (our most versatile head)
- Marking kit to identify exact pressure points
- Easy step-by-step Boot Punching Guide
Specs
- Compatible with all alpine and touring shells
- Magnetic head system makes swapping fast and repeatable
- Designed and assembled in Connecticut
Skier Reviews
Solved a tricky bunion fit the shops wouldn’t touch
I bought a ski boot punch from you last week to punch out the bunion area in my wife's boots. This was on a pair of Atomic Live Fit boots that already have stretchy rubber inserts in the bunion areas of the lower shell and have a dual compound shell – clear and opaque plastic. The local shops refused to try a punch due to the construction.
Used your punch and spot heated to 250°F with a small heat gun and punched the opaque part of the shell right above the rubber inserts.
Worked out perfectly! My wife said it feels great, no pain or pressure.
Gentle curve, about 5mm extra room at center of bunion.
Worked perfectly and instructions were on point
I finally got around to punching my boot and the new Boot punch tool worked perfectly! Your instructions were on point. Thank you for the eco wax!
BootForge™ FAQ
What’s the difference between the Standard Kit and the full kit?
The Standard Kit includes the Standard Clamp + Magnetic Receiver + Medium Head — perfect for most punches. The full kit adds additional head sizes for more specialized punches and faster workflow if you do a lot of boots.
Will it work on my boots?
BootForge works on most alpine and touring shells. If you have a very unusual boot and you’re not sure, contact us and we’ll help you confirm compatibility.
Do I need a heat gun?
Heat is required. A heat gun is ideal, but a strong hair dryer can work. You’re softening (not melting) the shell so it stretches and holds shape permanently.
Is it safe to do this myself?
Yes — follow the guide and you’ll be fine. The key is controlled heat + steady pressure. We’re not melting plastic; we’re softening it and applying force gradually.
Why not just go to a shop?
Shops are great, but no one knows your fit like you do — and shop punches add up fast. One punch can cost as much as this whole kit. Many shops also use BootForge because it’s straightforward and repeatable.